Uchida's Revolutionary Next Generation
Film Coating Machine, available today!
3 Functions
Coating with Thermal Transfer
Every part of the paper is coated by a very thin (2-3 microns) gloss film to its surface. This gives any job a wonderful high gloss look.
Coating with Melting Toner
This unique method makes it possible to achieve a coating with melting toner.
Using a high parallelism film the machine applies heat on to the surface of the paper. Toner is then applied to the surface, melted and burnished.
Gold and Silver Embossing
The U-Coater can also produce gold and silver embossing.
Additional features
- No trimming after coating is required.
- The coating has no odour (as in the U.V process).
- No chemicals or messy cleaning.
- Paper coated by the U-Coater can easily be folded (unlike laminated stock).
- The U-Coater has a very small footprint for an SRA3+ machine.
- Eco Friendly - uses only 600W (approx).
- The film coating is waterproof (unlike U.V.).
- Low machine cost compared to U.V type coaters.
Specifications
| Maximum Paper Size | 320(W) x 600(L)mm |
| Minimum Paper Size | 120mm (W) x 210mm (L) |
| Maximum Paper Weight | 90g/m2 - 350g/m2 |
| Paper Feed | Handfeed |
| Processing Speed | 12 sheets/min. (A4) |
| Paper Quality | All Qualities |
| Coating Thickness | 2 microns (approx) |
| Coating Technology |
Dry Coat, Partial Miror,140mm/Roll |
| Coating Material | 200m/Roll (Dry Coat Mirror Cast) 140m/Roll (Foils) |
| Finishing | Gloss Coat/Spot Coat/Foil Stamp |
| Operation | Touch Screen |
| Dust Free Prints | Option Dust Removal device |
| Cleaning | Not necessary |
| Warmup Time | 9 Minutes (approx) |
| Consumables | Dry Coat Film, Partial Mirror Cast Film Foils, Film Core etc. |
| Consumed Power | 600w (100V/50Hz) |
| Dimensions | 875(L) x 517(D) x 313(H)mm |
| Weight | 28kg |