Cut, Crease, Slit, Perf in one pass...
Professional card cutter and creaser AeroCut offers cut and crease finishing for any card sizes up to a maximum 365mm(W) x 520mm(L) sheet
Features
New finishing solution on both digital and offset field is offered by the UCHIDA AeroCut Auto Cutter and Creaser.
All jobs, cutting, creasing and perforating are operated with touch screen. This enables time saving, no complicate setting and specific acknowledgement required. Japanese high quality cutter, slitter and creaser can fulfill finishing result for all kinds of cards.
- 6 Rotary Slitting Knives
- Cross Cut Knife
- Matrix Creasing with adjustable depth
- Perforation unit with twin perf wheels
- Reg mark reader to eliminate print wandering
- Program memory for 80 jobs
- Feeds over 350gsm
Specifications
| Types | Standalone type |
| In-feed system | Upper belt suction feed |
| Processing speed | Business card (21 pcs from A3 sheet) - 6 sheets/minute Leaflets (center crease) - 8 sheets/minute Card (A5 x 4 from SRA3) - 7 sheets/minute |
| Cutting (Length) | Guillotine (Angle to feed direction) |
| Cutting (Width) | Slitter Roller (Along to feed direction) |
| Auto paper size detection | 350mm (W) x 500mm (L), SRA3, A3, A4 and A5 |
| Position setting | Fully automatic |
| Maximum paper size | 365mm (W) x 520mm (L) |
| Minimum paper size | 210mm (W) x 210mm (L) |
| Maximum paper weight | 350g/m2 |
| Minimum paper weight | 120g/m2 |
| Paper type | Offset, Coated, Glossy, UV coated, Laminated paper etc. |
| Maximum Loading capacity | 60mm |
| Feed out | Receiving tray |
| Minimum cut size | 55mm (W) x 50mm (L) |
| Maximum cut size | 210mm x 297mm (A4 x 2 sheets) |
| Pre-programmed job pattern | 78 kinds |
| Memory capacity | Up to 50 kinds |
| Perforating unit | Equipped as standard (two blades standard) |
| Creasing unit | Equipped as standard |
| Net weight | 150 kg |
| Dimensions | Unit : 877mm (W) x 714mm (D) x 1,037mm (H) In use : 1,720mm (W) x 714mm (D) x 1,500mm (H) |
| Power supply | 100 VAC - 240VAC / 50-60Hz |